[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Mirror Switch
More likely a dirty motor contact. In order to get both vertical and
horizontal adjustment, the motor has a solenoid attached (built in)
Sometimes this gets corroded and gunked up. Remove the mirror glass and
spray the snot out of it with WD-40. Check for power at the wires while
you're in there.
This is a good idea even if it's not the problem.
Paul Anderson:
Any direct correspondence, please put my name in the subject line so I
don't miss it.
Please send any direct mail to my private address as I don't keep up with
the list very well.
Private email AndersonPaul@juno.com
On Sun, 18 Apr 1999 23:39:45 -0400 Jon <jwilliam@cyberzone.net> writes:
>Am I right in assuming that if the side view mirrors on my 87 CGT
>aren't
>working, chances are, if it's not the fuse, it's a defective switch?
>I
>pulled mine apart and cleaned it and put it back together and they
>still
>don't work. Anyone have a part number for it, and know where I can
>find
>one, either used or new? TIA
>
>Jon
>87.5 CGT
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]