Strut mounts or bearings? (Was 200tq susp. clunk)

["Craig D. Niederst" <niederst@telerama.com>]

On the clunk from the front right wheel thread, I also have the same
problem. I've seen a couple of posts about replacing the strut mounts or
bearings that may remedy this problem. I know these are two separate parts,
but which one (or both) is "wearable" and is generally replaced when doing
struts, etc? Many posts seem to name the mounts and bearings almost
interchangeably, and I want to make sure I replace the right one (or both if
necessary). TIA.

Craig
'92 100S (80k)