re Code 2232 going ape!

["Smith, Kirby A" <kirby.a.smith@lmco.com>]

Dan Sinclair wrote:

PROBLEM:
Two days ago the engine check light started blinking almost continuously
with the engine warm.  At idle, the light is quiet.  With the car
stationary, and the engine revved up it remains quiet.  But as soon as you
start driving, the flicker kicks in, and keeps flickering until you stop
again.  It behaves like a jiggling short!?!?!  Code reported, 2232, nothing
more.  I'm losing ground....

Bet its the grounds on the intake manifold.  As the engine heats up, the
stud loosens in its thread, and the grounds don't.  Disconnect the grounds,
be sure the stud is well seated (maybe a lock washer under it), and then
make sure the grounds are well clamped on the stud (use star washers).

                .... Kirby   (Kirby A. Smith)
                              2.6 x 1988 90q
                          New Hampshire USA