[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MC Ur-q Conversion Questions



On Tue, 4 May 1999, Phil Payne wrote:

> An MC motor in an ur-quattro?
> That's what we call an MB.  OK - most of the changes are obvious.  The

	Yep.  Hence why I want to do it.  You know very well the
advantages of the MB over the WR.  Of course I will still need a Torsen
but thats FAR in the future.

> ur-quattro's inlet air system is retained but just about everything else
> comes from the MC.  Including the wiring harness.

	Yep.  I figured this.  Just looking for specifics.

> The MC metering head is used on the ur-quattro air filter box.  I don't
> think much needs to be changed.  The after-run water pump is mounted
> on the side of the block on the MB, but I think you could probably
> leave it floating as in the 200TQ without any problems.
k
	Ok, I agree about the After Run Pump.  Now on the Metering head.
Do I have to use the MC Metering Head or will the KX/WR Metering Head
work???  I'm guessing there is something extra on it to accept ECU
enrichment from the Knock Sensor.  Or does it just Retard Timing?
	Thanks
		Todd