re Re: Solder vs. Crimp

["Smith, Kirby A" <kirby.a.smith@lmco.com>]

"Frank J. Bauer" <frankbauer@thevine.net> asked:

any sources for a similar compound crimper that will also crimp the
insulation clamp for the uninsulated terminal connectors typically used on
vag harnesses?
*****
I think what you want is a Technitool catalog.  They have several tools that
are appropriate for the crimps used on Audi connectors.  The crimp anvil
should look like a "W" on one side (or somewhat like a lower-case omega.)

                .... Kirby   (Kirby A. Smith)
                              2.6 x 1988 90q
                          New Hampshire USA