[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: CGT rant continued
> I now have another passenger side axle shaft for the 85 CGT from NAPA that is
> too _long_. First one was too long, second (way) too short, third too short
> (popped the keeper "C" clip on the road), and now- fourth too long. They
> obviously don't have the right numbers in their books to deal with this car.
Obviously... I would demand your core back and buy the part from someone
who knows Audis better...
> When buying the brake discs from the same vendor, they initially provided
> rotors that were too small. I took in the original rotors and we physically
> matched them up to rotors listed for a 4000 Q.
three different rotors on the coupe GT - thin little ones thru 83, thick
little ones on '84, both with 4 x 100 bolt pattern, then 85 on has the
thick "big" ones with 4 x 108 bolts - exactly the same front brakes as
the 4kq. personally I have a set of thick "big" ones from a 16v
scirocco (4 x 100) on my '82, but let's not confuse the issue any
further...
--
Huw Powell
http://www.thebook.com/human-speakers
82 Audi Coupe; 84 4kq; 85 Coupe GT
http://www.nh.ultranet.com/~human