R134 conversion - TSB email version

[Michael Murphy <mmurphy@nais.com>]

FWIW, with the AllData CD w/TSBs you can redirect TSB printing
to a Win/DOS print file.  

The AC Conversion TSB print file is large (>320kb) but was successfully
emailed and printed.  It covers all 86-93 models with either Nippo or
Zexel compressors - does not apply to York or Delco-Air compressors.  
Please note:
  - the print file can ONLY be printed, not displayed.
  - Unix/MAC users can probably print the file if a DOS/Win emulator
    that supports DOS/Win printing is installed.  I have not tried this.

If you want the file, I can recreate it in any of the standard formats
(including PostScript) supported by the Win95 printer subsystem.
Here's what you need to do (w/caveat):
1. If you don't know how to print a "prn" or "ps" file, go to the
   Microsoft knowledge base article (link below) that tells you how
   to print these files:  
   http://support.microsoft.com/support/kb/articles/q158/0/81.asp
2. Email me your printer driver Mfgr/Model info (from Windoze printer
   info).  If you have a special driver i.e. had to install it 
   from a disk/CD, I might be able to get close to your printer's driver
   format (see caveat).  Brandon Hull was able to print the file on an
   HP LJ6L even though the format I emailed was LJ4 - std. HP PCL
   should be OK.
3. Caveat: I'm not responsible if your printer starts spewing blank
   pages or printer settings go to hell in a handbasket.
HTH,
Mike Murphy