Re: Separating 5k windows switches?

[Wallace White <wallace@remdesign.com>]

Thanks, Phil, and to those who responded privately. I also found Scott
Mockry's helpful instructions at his web site at
http://www.sjmautotechnik.com/elec.html#pwrsw, part of which is, "The
window switches pop out of the main panel by prying from the center
towards the side." With a screwdriver, that worked great for me; I think
Phil's method is equivalent.

On to the next difficulty! I was able to remove the switch topper (mine
happens to be smooth, rather than quasi-knurled for "up" like some) but
that didn't give me much access to the switch. The main body covers
everything except for two skinny little switch spades and the LED, and
there is (or was, till I removed it) a piece of clear tape over
everything. No contacts in sight. Looks like the opposite side (the
connector side) needs to come off, but I haven't been able to convince
it to. 

Thanks to all for your help.

- Wallace
  '87 5kcstq 154k