[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MAC05A - KG engine



At 09:54 AM 5/31/99 +0000, Phil Payne wrote:
>Does anyone know anything about this beast?
>Replacing the boost line, ISV and setting up CO/idle screw correctly
>cured his immediate problems, but I have a few questions regarding the
>MAC05A and the KG engine:
>
>a) There's a 'check engine' light but it would appear the ECU doesn't
>   store codes in the accepted way.  

Phil,

The Mac-05 ECU uses a fault code retrieval procedure which is the same as
was used on the USA "KH" Turbo engine with the Mac-07 ECU. It requires a
different technique to pull the codes, you have to manually close the full
throttle switch and then use the brake pedal to step through the sequence.
The Check Engine light, and the tachometer dial position indicate the
faults. A European list member confirmed that the "KH" procedure works on
the Mac-05 "KG" setup. My web site has the details at

http://www.sjmautotechnik.com/ecufkh.html

HTH
Scott Mockry