RE: Shogun pump mounting...

["Avi Meron" <avi@cosmoslink.net>]

OK,
The injector fan is mounted via two rubber rings (two different sizes) and
hold down clamps.
You use the small ring and you slide it on the Shogun pump, about middle of
the pump (fits real well). You mount the pump on the same spot that the Audi
pump was using a hose clamp.
It looks good almost like OEM.
Avi

-----Original Message-----
From:	frank j. bauer [mailto:frankbauer@thevine.net]
Sent:	Monday, June 14, 1999 12:09 AM
To:	Avi Meron
Subject:	RE: Shogun pump mounting...

At 08:27 PM 6/13/99 -0700, you wrote:
>a cooling injector mounting ring to attach the pump to the old set up

i don't understand what you are referring to here...

frank