Re: 87 CGT Cluth Pedal Help

[Michael Williams <urquattro@surfree.com>]

Brian Raymond decided to speak these words:

>What I need is the part number of the pin, holder thing in the clutch pedal,
>and the actual clutch pedal (looks like the pin wore the actual metal on the
>pedal down).


I dont have the part numbers anymore, but its called a clevis, the part 
that holds the pin that connects to the master cylinder rod.  Actually, 
you probably dont need a new pedal, i just installed these parts on my 
urq and i found that the replacement pin is actually slightly larger than 
the original, presumably to make up for the slight extra wear on the 
clutch pedal.  Just make sure to get the clip, pin and the clevis for it 
to actually work.



later...

Michael Sheridan Williams
San Francisco, CA
ICQ# 11740998
1983 UrQuattro, MC--1.8 BAR, borla, 16x7.5 OZ Mito's w/ SP8000's, K&N
1985 4000S Quattro, Koni Yellows/Coilover (2B), strut brace, Sport 8000 
Tires, K&N
http://members.aol.com/daserde2