Re: Type 44: damaged door wiring loom/switch problems

[David Ritter <dritter@mich.com>]

Tim King writes:

 > Ok, I vented, now I need to fix this. I've seen the limited info about this
 > on Scott Mockry's excellent web site, but would appreciate any BTDT tips for
 > repairing this problem. I'm thinking something along the lines of cutting,
 > splicing, then heat-shrink tubing about 3" into each wire. Any other
 > thoughts?

I'd say, about a foot or so of new wire should do it. The best answer
is to have new wire with no connections in the flex zone. Splice in
inside the door and inside the kick panel. BTDT

David