[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: After run fan & Pump

To: <peterb@mysysltd.com>, "Quattro List" <quattro@audifans.com>, "Jack Gagnon" <bullitt@cybertours.com>
Subject: RE: After run fan & Pump
From: "frank j. bauer" <frankbauer@thevine.net>
Date: Tue, 06 Jul 1999 23:12:00 -0700
In-Reply-To: <000301bec824$178ac1e0$5e4f7018@wlfdle1.on.wave.home.com>
References: <001301bec607$a99c0e00$2915a1d0@jack>
Sender: owner-quattro@audifans.com

At 10:54 PM 7/6/99 -0400, Peter Berrevoets wrote:
>Having a similar problem on my 200TQ.  Another way to start the fan would be
>to ground the temperature sensor that triggers the fan.  This little item
>can be found attached to the wastegate heat shield. It sits attached to an
>upside down 'U' shaped mount.  The wire can simply be pulled of and touched
>to a bare metal ground (intake manifold).

this will run the injector cooling fan, but it shouldn't have any effect on
the afterrun coolant pump/radiator fan.

frank

References:
- After run fan & Pump
  - From: "Jack Gagnon" <bullitt@cybertours.com>
- RE: After run fan & Pump
  - From: "Peter Berrevoets" <peterb@mysysltd.com>

Prev by Date: Re: FW: Stongard group purchase
Next by Date: Re: Just bought my Audi!
Prev by thread: RE: After run fan & Pump
Next by thread: not enough A.C.
Index(es):
- Date
- Thread