[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Oil Filter Change



Alexander van Gerbig writes:
> Never installed an oil filter in my 80, any advice?  Actually how about some
> simple instructions, so I don't screw anything up.  Thank you very much!

Pretty simple... just unscrew the old filter and install the new.
You may need an oil filter removal wrench to loosen the oil filter.
Prime the new filter by filling oil in it prior to installation.
A bit more than hand tight is good enough.  Use only good OEM filters.
Check oil level again after running the engine for a few minutes.

-Ti
96 A4 2.8 quattro
84 5000S 2.1 turbo
80 4000 2.0
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti@amb.org
 //////  http://metalab.unc.edu/tkan/
///