[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Wheel Bearing Failure
>I found that BOTH of them were shot. Both have excessive play. I
> have not finished pulling the struts yet so I have not taken a close look
at
> them. I purchased the bearing from Blau and had my local NAPA store
> machinist/owner press them into the struts. What could possibly have gone
> wrong?
Either the outer CV nuts weere not torqued properly or the hubs were damaged
from a previous failure. Surprising you did not hear the bearings if they
are that loose.
Bryan Doughty
home.gci.net/~eurocar