(Fwd) Re: 86 4000 CSQ help requested

["Ken Keith" <auditude@neta.com>]

Matt, 

I am forwarding this to the list, since I am not expert on the 
troubleshooting (merely trying to clarify what the other post meant).

Good luck,

Ken

------- Forwarded Message Follows -------
From:           	mjammann@ibm.net
To:             	<auditude@neta.com>
Subject:        	Re: 86 4000 CSQ help requested
Date sent:      	Thu, 22 Jul 1999 12:03:11 -0700


> "Brinkman, Gerardo V" <GB127167@exchange.DAYTONOH.NCR.com> wrote:
> > If not suspect the fuel pump relay - to test it, remove the relay
> > and use a wire to make the connection on the fuse relay panel
> > (effectively by-passing the relay).

So the terminals to jump on the fuel injection relay socket are 
which.  I am assuming it would be the larger terminals(numbers 30 
and 87), is that correct?  

Also, if I get no gas with the relay jumpered, what should I check next.

thanks,
Matt