Re: Rebuilding PS lines -100q

[Daniel Jones <captaudi@ma.ultranet.com>]

I just had the high psi hose from the pump to the rack redone on a 90 200q
here in worcester ma,  this has the o-ring fittings.  The name of the shop
is "Tubes & Hoses".  Total charge $35.  quality looked good and no leaks yet.

HTH
Daniel Jones 84 4ksq x2
Dealer tech.






At 04:41 PM 7/27/99 -0400, you wrote:
>There has been talk on the list over the years about rebuilding the
>hydraulic power steering lines for the rack, pump and bomb.  Most of this
>has related to the 5k series, and the verdict was ~$20 and 20 minutes at any
>hydraulic hose place.
>
>Well, I've got a set of lines for the 100/200 series that use orings instead
>of crush washers.  I've visited three different hose places in the area,
>including the local Parker supplier, and no luck.  They all say they don't
>have the ends, don't use the same crimps, and can't reuse the end
>fittings...  Grrr.
>
>Any other suggestion?  Has anyone has the PS lines with orings rebuilt
>before?
>
>Thanks!
>-S
>
>Stott Hare
>85 Callaway 4ktq
>89 100q
>84 4ktq (MC conversion in progress) 
>
>