Re: Euro Lights H4 high beam won't light

["Fred Munro" <munrof@isys.ca>]

Hi Wolff;

The Euros are wired so that the H3 & H4 high beams come on simultaneously.
Did you wire the connectors properly? Since no instructions came with the
lights, I checked out the internal wiring on mine before I installed them to
make sure I wired the connector blocks properly.
    The autocheck only checks the low beam circuit; it doesn't care if the
high beams are burnt out :o)

HTH

Fred Munro
'91 200q  278k km

----- Original Message -----
From: Wolff <quattro200@earthlink.net>
To: <quattro@audifans.com>
Sent: Sunday, August 01, 1999 11:53 AM
Subject: Euro Lights H4 high beam won't light


> I finally got a chance to put the Euros into the 200. I did a quad load
> reduction relay setup with 12 gauge wire. I found automatic strippers
> and cam lock crimpers to be invaluable. The H4 low beams work and the
> autocheck chimes. The H3's light when the high beams are selected
> (curiously the autocheck does not alert), but the h4's go out. I though
> that the headlight assemblies were wired internally to light the high
> filament of the h4 along with the H3. What gives?
> Wolff
>