[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: turnning signals - 5KTQ

To: "Britt Crowell" <britt@fortcollins.com>, <quattro@audifans.com>
Subject: Re: turnning signals - 5KTQ
From: Kneale Brownson <knotnook@traverse.com>
Date: Tue, 10 Aug 1999 17:14:57 -0400
In-Reply-To: <00a801bee34c$55058f80$3d190f0f@fc.hp.com>
Sender: owner-quattro@audifans.com

I can't speak to the electical doo-dads, Britt, but I've read here a couple
times that when reconnecting the steering wheel shaft, you need to have
someone/something applying pressure to take up that 1/4 inch while you
tighten the retainer fastener.

Kneale Brownson

At 11:20 AM 8/10/99 -0500, Britt Crowell wrote:
>Help again. I just finished replacing my steering arm this weekend (thanks
>for the help guys) and now my turning signals wont cut off by them selves
>and the horn wont work! it appears that my steering wheel is about 1/4inch
>out from where it should be. If I push the wheel in against the spring I can
>make every thing work. I guess if I need a little more of a workout I would
>be ok.  Help again guys/and gal?
>Britt
>
>

References:
- turnning signals - 5KTQ
  - From: "Britt Crowell" <britt@fortcollins.com>

Prev by Date: RE: Boating with an S4
Next by Date: dumb turbo questions
Prev by thread: Re: turnning signals - 5KTQ
Next by thread: Re: turnning signals - 5KTQ
Index(es):
- Date
- Thread