[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
How to check diff fluid level?
Alexander,
Look in the Bentley, 39.3. This has a good picture of your 089 xmission.
You will see the "fill plug". It is on the drivers side, just below the
firewall but recessed into the side of the diff. Go to Sears and buy the
17 mm hex wrench, <$8.00. I had to use a 12" piece of pipe to get enough
leverage to remove the plug. When you get the plug out, just stick your
finger in the hole to check the level. I use a 60 cc syringe to fill the
diff.
I found that if you take a little time in the index, it pays off. Also
use post-it-notes to highlight subjects that you just happen to come
across.
Good luck.
Al Streicher
Rathdrum, Idaho
'90 80 Black 140K