RE: 4kcsq strut success

["George W. Selby, III" <IsuzuG@prodigy.net>]

It's back in there.  The wheel bearing replacement was a success, and the 
obnoxious noise has stopped.  Total cost was $60, $40 for the bearing, and 
$20 for the press and the use of two lackeys to do the operation in the 
shop.  Nut on top of the strut was a PITA to reinstall, just wanted to spin 
with the impact, but fortunately I had a pair of old thin shank pliers that 
I was able to squeeze in there while I tightened the allen nut.

George Selby
78 F-150 400M, 4 on floor, 4x4
86 Audi 4000CS Quattro
IsuzuG@prodigy.net