Re: Lambda Guage

["Jason Gray" <jason510@worldnet.att.net>]

-----Original Message-----
From: Nate Stuart <nathan.stuart@maine.edu>
To: Quattro List <quattro@audifans.com>
Date: Sunday, August 29, 1999 9:15 PM
Subject: Lambda Guage


>Does anyone out there know a cheap scource for these, or have a schematic
to
>build my own (preffered....want more than the std. 10 LED bar anyway)
>
>TIA!



 The intellitronix/cyberdine LED lamda readout gauge is $30 from eithor
Summit or JC Whitney.  I have used this gauge and they are a usefull tuning
tool. Paying for a guage with more than 10 LED bars is a waste of money, the
signal from  the actual Lamda sensor is very primitive, little more than a
ritch/lean signal. For lots of info an Lamda sensors and readout gauges,
check both the relevant articles at http://www.zcarmag.com/tech_info/

Later-
Jason K Gray
Wasilla Alaska
'87 4000cs Q
'73 2-door 510 L16T
510 website http://home.att.net/~jason510/

Those are not oil stains on my garage floor, they are bluebird droppings!