Re: 4ktq wiring notes

[Todd Phenneger <phen9461@uidaho.edu>]

sure, but check color codes.  This is for 85' turbo.  Similar to MC but
slightly different.  
	Blue wire with black connector.  Ignition On.
	Brown wire with stripes??  Goes to fuel Pump relay.  this was on
its own as well.  We had to pull the fuse box to find the connector.  Pull
the black connector under the Fuel Pump relay and there is an empty socket
in one corner.  Like inside corner towards the back of the car.  I think
it is pin Bs or something.  B is the connector location.  S is the
location on that connector.    (Personal Note, my 84' Fuse Box Panel has
to be changed out.  85+ 4kq's had the proper pinout for the turbo relay
but but my 84' is missing a hole that the turbo relay needs.  Dont know
why, anyhow, if you have an 84' you may need to change the fuse box panel.
Not hard, just take your time and get it right.)
	Now we are inot the 4 pin connector with 3 wires coming out of
it.....   Yellow wiire is for dumping ocdes.  I'm going to wire mine into
the OXS light since I have de-activated my light permanently anyhow. :-)
Now it will flash when I dump codes.  The other wirgoes to the brake light
switch.  NO Idea what this is for.  DOes anyone knw?????   Last wire is
blue and black and I ddont know what it is for but I dont think you need
it.  Not sure yet.
	Oh,m and of course the DUAL Reklays for the ISV goes over there
too but no custom wiring for that.  Just plug the relays in to the socket
that is on the harness.
L8R
	Oh,a nd make good connections.  Dont want to have to troubleshoot
them.   Good luck.

	Todd Phenneger
	1985 4000 quattro / silver / daily driver
	1983 ur-q / black / fixing it up
	1984 4000 quattro / modified/ awaiting Turbo Transplant.
	1987 4000 quattro / Saphire Metallic Blue/ Girlfriend's
	1996 A6q / Volcano / Dads Car
   *****1985 5kt / PARTING OUT!

On Wed, 8 Sep 1999 JShadzi@aol.com wrote:

> In a message dated 9/8/99 2:11:08 PM Eastern Daylight Time, 
> phen9461@uidaho.edu writes:
> 
> << They are all organized in plugs.  One plug (the 6
>  prong you dont need, all AC stuff I guess)  the 4 pron you need wires
>  from.  You do have to do a bit of splicing but not much.   >>
> 
>     Are these on the drivers side kick panel?  Can you specify what wires you 
> did need (their function)?
> TIA!
> Javad
>