Re: '92 100CSQW oxygen sensor(s)

[Daniel Adams <doasc@yahoo.com>]

--- JIM GRIFFIN <qwattro@usa.net> wrote:
> Tomas Leveckis <tomas.leveckis@analog.com> wrote:
> >I noticed an o2 sensor type element in exhaust manifold on each side
> of >the
> motor.....is there 2 of them?????
> >TIA,Tom
> 
> Yep, on the V-6 motors there are two of them. And they aren't
> cheap... about
> $130 apiece, from what I remember.

Just did them on my 93 90CS.  Paid $129 a piece from Blaufergnugen
(dealer $209).  Paid 1.1 hours a piece for the dealer to install them
($150 total).  

If you do them yourself, buy a good O2-sensor socket.  I had a deep
well 22MM socket but the shoulders of O2-sensor was to wide.  I bought
a socket from Advanced Auto Parts, which was junk.  I got a much
heavier, better quality socket from Autozone, but my cat-conv clogged
and my car had to be towed, before I got a chance to try it out.  Since
it was at the dealer I figured I would let them do it.

regards,
Daniel Adams

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com