RE: TAP chip

["Lewis, Gary M" <Gary.Lewis@West.Boeing.com>]

Glen said;

> I *strongly* recommend the IA mod for the 10V turbo cars. BTDT. Works
> great
> for many years and many miles at 15 PSI. Original 85 ur-q engine was still
> running strong at >195,000 miles with the IA mod installed for well over
> 100,000 miles of the 195K total. It works. The engines live. Worth the
> bux.
> 
> -glen
> 
I have no direct experience with IA.  However, everyone who has had
experience with IA hasn't had any complaints.  I suspect Ned makes a great
product, I just think he is priced high (but getting better).  

I have had experience with Scott Mockry's 10v chips and springs, and they
have performed excellently.  They are significantly less expensive than
Ned(on the order of 50% of Ned's cheaper prices), and I know Scott does
extensive testing on all his products.  No hacks, diodes, pressure
regulators, etc, just a nice eprom/spring solution, same as Ned.  This is
for the 10v stuff only, I don't think he has a 20vt solution yet.

IUD,

> Gary Lewis 
> 90 200tqw, Silver and Platinum, Stock
> FOR SALE!!!  88 5kcstq 1.8 bar 110km Pearl w/Fuchs, K24 turbo, 2-piece EM 
> 86 5kcstqw Sapphire and Platinum, stock 
> Mergers, Acquisitions, Public Offerings
> (818) 586-2469