CIS injector fun...

[JShadzi@aol.com]

    I pulled some injectors today to replace the rubber seals.  I used the 
little L shaped tool with a piece of plywood on the valve cover and a good 
sized pry bar.  The first 4 came out OK, but the last one was a doozy.  The 
pry bar slipped off the injector several times sending the tool 30 feet in 
the air, and once bouncing off the roof...missed the gutter somehow!  I must 
have had my 160 lbs on the end of that pry bar, about 18" long;  those old 
o-rings were hard as rocks!
Javad Shadzi
88 80Q