Re: ceramic coating and 2-piece EM...

[JShadzi@aol.com]

In a message dated 10/4/99 5:35:49 PM Eastern Daylight Time, 
Jim@Ur-q.freeserve.co.uk writes:

<< Rather along the lines that I was thinking except I'd reckoned even little
 pieces might come off (might? with a DIY kit I'd reckon that it's got to be
 certain to lift).
 
 The coating might be inexpensive but if it wrecks a turbo....
 
 Jim Haseltine
 
  >>

    I would not recommend trying to DIY coat the inside of the manifold, that 
should be left to those who have the right equipment to properly coat the 
inside.  You can, however, keep EGT high and underhoood temps low by coating 
the _outside_ of the manifold, with no harm to any accessories posed...
Javad