Re: Distributer Rattle?

["Nate Stuart" <nathan.stuart@maine.edu>]

BTW When I had the cap off I could move the rotor a couple of mm to either
side until the gear engaged the cam drive.

----- Original Message -----
From: Nate Stuart <nathan.stuart@maine.edu>
To: Quattro List <quattro@audifans.com>
Sent: Tuesday, October 05, 1999 1:52 AM
Subject: Distributer Rattle?


> While installing a new impeler on my Shogun pump I popped off the dist.
cap
> b/c of a noise I've been hearing around 2500 on up. Its a high pitched
> metalic noise.
> I've read info on the 20v list about fixing noisy distribs. by shimming
the
> gear with washers, can this be done with my MC motor? If so what parts do
I
> need and what is the basic procedure?
>
> TIA!
> -Nate
>
> '87 5kcstq
>