Re: Headrest Inserts ??

[Sean Ford <audi_92_100cs@yahoo.com>]

--- Charlie Smith <quattro@elektro.cmhnet.org> wrote:
> While looking at some German Audi literature the other day, I noticed
> in the A8 booklet that the rectangular doughnut headrests have an
> insert
> piece in them that spaces the headrest forward just a bit.
> 
> That, combined with the fact that the doughnut headrests in my '93 V8
> are so far back that you can't lean your head on them, made me start 
> wondering.  So I fired up the ETKA parts viewer ... and found that
> this piece is listed in the parts book!
> 
> Has anybody seen these headrest pads in the US, or this a Germany
> only
> option?  I've got the part numbers if you are interested ...
>    441 881 761 G  -  cushion (leather) with about 4 color codes.
>    4A1 881 761 F  -  cushion (leather) with about 4 color codes.
> 
> These pieces look like they are about an inch thick and cover the
> entire
> front surface of the headrest, and have a protrusion on the back that
> fits
> through the center hole in the headrest to hold it in place.
> 
> I'd sure like to come up with a couple of these, or maybe just make 
> something similar.

Does anyone know if this is applicable to the '92 - '94 100? It sounds
like this would alleviate some of the complaints coming from my wife's
side of the car.

=====
Sean Ford
audi_92_100CS@yahoo.com
http://www.geocities.com/audi_92_100cs
'92 Audi 100CS 5-spd non-q
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com