Finally got some work done

[Anton Gaidos <Anton.Gaidos@flextronics.com>]

 It has taken me sense April but finally I have resolved the radio antenna
issue and the seat heater on the wife's '91 200q. I spent the better part of
the morning tracing the reception problem. Turns out it was a hack from a
previous owner. For some reason they cut the rear antenna cable. Once I
found it, it was simple enough to splice it back together.
 The seat heater was the standard issue. Burned and broken. After testing
combinations of flux, solder and heat I was able to solder up the wire and
enclose it using shrink tubing. That should hold for a while.
 Bottom line? Made some points with the curvaceous one.
Anton

Anton J. Gaidos, III
Circuit Board Design
Flextronics, Intl
408-576-7802