Re: '87 5KTQ manifold ground

[MHLIGGINS@aol.com]

     In order to go to the coil it has to go somewhere else 
first and "change color". Bentley does not show 
anything from the coil going to what is labeled as 
Ground attachment #17 (which is how they designate 
the intake ground in the book). I must assume that the 
wire leaves the intake, goes into the wiring harness, 
then goes to some "common" area and from that area
a wire goes out to the coil. Anyone know which part
of the dash I need to rip out to locate where that is?
     Based on what I've seen, that could be where the 
problem is.

     Thanks.
     --ml

<<>      The ground that attaches to the intake manifold of
> these cars has two brown wires that go into the
> wiring harness. One goes directly to the ECU. Where
> does the other one go?

Coil.

--
 Phil Payne>>