RE: Headlight adjustment H1/H4 Euro's

["Iain Atkinson (ETL)" <iain.atkinson@etl.ericsson.se>]

Jim

Thanks for the info, I took the headlight out last night, no special tools needed, you are  right on that score, my problem was the previous owners had chewed the heads. I just cut a slot in them and a drop of WD40 got everything moving again, believe it or not the adjusting screws are mad of brass????  BTW TAF-X works a treat in the gearbox, much improved change with no problems so far.


Cheers


Iain


-----Original Message-----
From:	Jim Haseltine [mailto:Jim@ur-q.freeserve.co.uk]
Sent:	21 October 1999 22:22
To:	Iain Atkinson (ETL)
Subject:	Re: Headlight adjustment H1/H4 Euro's

Cross-head (Philips). On mine anyway.
Jim Haseltine
----- Original Message -----
From: Iain Atkinson (ETL) <iain.atkinson@etl.ericsson.se>
To: <quattro@audifans.com>
Sent: Thursday, October 21, 1999 2:50 PM
Subject: Headlight adjustment H1/H4 Euro's


> Hi All
>
> I was looking at the adjusting screws on my coupe Q '85' headlights last
night and couldn't really work out which sort of  screwdriver would turn
them. Is there a special tool needed???? I was looking at the front of the
headlight (I have H1/H4 type euro's). I need to raise the drivers side high
beam lens as it is pointing too low.
>
>
> Also I noticed November's Cars and Car Conversions magazine, had an
article on the Pikes Peak S1 Q,  I haven't read it yet but it looked to be 4
or 5 pages.
>
>
>
> TIA
>
>
> Iain
>
>