Audi200 window adjustment pt. 2

[Mike Posner <posne@cts.com>]

My thanks to "Cobram" for his succinct and fast reply to my problem 
re the sheared window guide grommet, and the cracket plastic  "hat"
that rides atop the vertical height adjustment screw. It seems  likely that
the problem came when the plastic hat cracked  allowing the window to
exceed its  travel limits, resulting in the grommet which hold the
passenger window in its channel, to shear.   My question now is:  Does the 
decapitated grommet which remains in the channel  require th e removal of
the inner panel.  The grommet cannot  be removed by sliding it upwards
as the channel is closed at the top, and  it doesn't appear to want to exit
on the bottom of the channel either. I  suspect Ill have to pull the inner
panel out.  There are several  electrical connectors thast will have to be
dxed, but I don't want the door locking linkages to be  dxed as well.

Any special procedures for   r&ring the grommet and the hat for the height
adj. screw?  I'd like to order the parts tommow and sew this job up,
before the next one comes knocking.  Thanks for your help.   Mike .