[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: 5KCSTQ: breather hose question
I made my own with 2 different sizes of heater hose and an adapter
available at any auto parts or automotive hardware store. It ain't
pretty but it works and cost a whole lot less than OEM. Blaufergnugen
had them on for $27.95 US which would probably have been over $60
Canadian by the time I actually got my hands on it (currency exchange,
duties, taxes, government robbery,fees, more taxes, more government
robbery, etc). One day, I will replace it with the right one, but right
now there are other more critical components that MUST be replaced with
parts that have to be bought, not made. HTH
Stephane Livolsi
180 Yorston St
Williams Lake, BC, V2G 3Z1
ph 250-392-2637
fax 250-392-2693
'86 5KTQ stock (if you don't know what it means, you aren't in the club)
>----------
>From: Randall Paquette[SMTP:qpilot@netscape.net]
>Sent: November 7, 1999 11:24 AM
>To: quattro@audifans.com
>Subject: 5KCSTQ: breather hose question
>
>Folks,
>During a recent (today) engine compartment inspection, I noticed a dime sized
>hole in the breather hose that goes from the right side of the engine (facing
>engine) up to the top of the valve cover gasket. ITs a fat but flat soft
>hose.
>I need to purchase a new one but there are no dealers around me. I need help
>with the correct name of the piece and some help as to whom I should call to
>mail order the part from.
>TIA,
>Randy...
>
>____________________________________________________________________
>Get your own FREE, personal Netscape WebMail account today at
>http://webmail.netscape.com.
>