RE: Pistons for MC motor needed...

[Michael Sheridan Williams <mike@urquattro.com>]

Michael Pederson decided to speak these words:

>2. I've heard, but do NOT know for a fact, that high performance rods, e.g.
>Carrillo, for the VW Gti fit the Audi engines.  Does anyone know if that
>might also be true for VW pistons?


Well, given the fact that the rods are the same (at least in the 3B 
motor, not sure about the MC, i would assume so) as in the GTI, i would 
say that it makes sense that the carrillo rods would work too...

later...

Michael Sheridan Williams
San Francisco, CA
ICQ# 11740998
1983 UrQuattro, MC--1.8 BAR, borla, 2B Coilover/Koni Yellows, Delrin 
Bushings f/r, 16x7.5 OZ Mito's w/ Yoko A520's, Cibie H4/H1's, K&N (blah)
1985 4000S Quattro, Koni Yellows/Coilover (2B), strut brace, Sport 8000 
Tires, K&N
http://members.aol.com/daserde2