[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: K24 finally installed in 1986 5000cstq



Lewis, Gary M decided to speak these words:

>My numbers compare with Eric's on my ex-88 5kcstq mit der k24.  I could pull
>1.8 bar in 2nd gear at around 2,800 rpm.  In higher gears it only gets
>better.  Your MC Ur-q *may* spool quickly (I suspect) because of the single
>pass IC.  Eric is using the dual-pass, rather restricitve...


That is very possible.  There is also the fact that the intake system is 
shorter (i believe) than on a 5ktq, and that my exhaust system is very 
free flowin, no cat, 2.5 inch one borla muffler...

Now, in 2nd gear, if i throttle correctly, i get max boost around 3200 or 
so...but that is still pretty good...

later...

Michael Sheridan Williams
San Francisco, CA
ICQ# 11740998
1983 UrQuattro, MC--1.8 BAR, borla, 2B Coilover/Koni Yellows, Delrin 
Bushings f/r, 16x7.5 OZ Mito's w/ Yoko A520's, Cibie H4/H1's, K&N (blah)
1985 4000S Quattro, Koni Yellows/Coilover (2B), strut brace, Sport 8000 
Tires, K&N
http://members.aol.com/daserde2