[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 5ktq exhaust braccket
John;
When I did this job on my '91 200q 10v, I removed the cat to get the
passenger side mount in. In retrospect, it would have been easier (and
cheaper) to buy two sets of the drivers side mount and use a bolt instead of
the passenger side mount with the attached stud.
HTH
Fred Munro
'94 S4 92k km
----- Original Message -----
From: <JJK1204@aol.com>
To: <quattro@audifans.com>
Sent: Friday, November 19, 1999 5:17 PM
Subject: 5ktq exhaust braccket
> Hi all,
> My 87 5ktqs exhaust bracket has corroded away. It is the one that connects
> from a bracket on the rear of the trans/front diff to the rear mounting
bolts
> of the cat. I bought the two parts of the bracket. Removing the drivers
side
> was no problem, just remove the nylock nut. But the passenger side appears
to
> be a problem as there does not seem to be sufficient room to get the
attached
> bolt out of the bracket holder. Any BTDT information would be greatly
> appreciated.
>
> By the way, my endeavor was greatly eased by making prints from the Family
> Album and bringing them with me to show the parts guy. It was an absolute
> godsend at the VW/Pontiac dealer where I had to get upgraded door lock
parts
> for my sons 95 Golf3. When he brought back an incorrect item we simply
> referred to the Family Album text to find the correct PN.
>
> Thanks
>
> John Katos
> 87 5ktq
>