Ball housing R+R

["Dave" <dave@ohlemacher.com>]

My 89 90q had a very sloppy shifter and it was hard to get into some gears
and you could actually lift the shifter 'up' a couple inches!

Replaced the ball housing ($65 from dealer, couldn't find it anywhere else)
and it shifts like a new car with no slop!  The old one had a tear in the
rubber surrounding the ball cup going about 75% of the way around.

Easy to check and to replace, took about 10 minutes.  Just follow the
Bentley manual.

Dave
89 90q (almost 100%, just a little more cleaning)
91 200tqw