[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MC conversion questions (4KQ)

To: Todd Phenneger <phen9461@uidaho.edu>
Subject: Re: MC conversion questions (4KQ)
From: Martin Pajak <urquattro@wave.home.com>
Date: Wed, 15 Dec 1999 07:40:15 -0800
CC: isham-research.freeserve.co.uk@pop.pol.net.uk, Gary Erickson <erickson@teleport.com>, quattro list <quattro@audifans.com>, "Buchholz, Steven" <Steven.Buchholz@kla-tencor.com>
References: <Pine.GHP.4.21.9912150246590.1713-100000@raptor.csrv.uidaho.edu>
Sender: owner-quattro@audifans.com



Todd,

>
> ur-q's Temp sensor is located.  So it would be very easy to mount a second
> sensor there for some reason.  Not sure if MC has this flat spot.
>

I used an MC intake with machined holes for the temp. sensor like the American
Ur-q's.  I saw a problem with KH throttle body is different and will not take
the idle/full throttle switch easily.  MC throttle body will have a problem
with an extra opening when bolted to the KH IM.  Some people fill that hole
with aluminium weld, others???
So really MC intake and throttle body should be used for the MC swap.  All you
have to do is have a machine shop drill you three holes and tap two.  Done.

Cheers
--
Martin Pajak

http://www.geocities.com/MotorCity/5939

1983 Audi Ur-quattro (229,000 km)
1986 Audi 4000 S Quattro (418,000 km) with 5 bolt pattern

Follow-Ups:
- Re: MC conversion questions (4KQ)
  - From: Todd Phenneger <phen9461@uidaho.edu>

References:
- RE: MC conversion questions (4KQ)
  - From: Todd Phenneger <phen9461@uidaho.edu>

Prev by Date: New Gaugepage
Next by Date: Re: 4kq MC transplant questions
Prev by thread: RE: MC conversion questions (4KQ)
Next by thread: Re: MC conversion questions (4KQ)
Index(es):
- Date
- Thread