The UK quattro Network
The UK's mobile Audi 5-cylinder mechanic - 07833 654800, 24x7
Specialist in turbos, quattros, electrics and non-starts
Removing and installing camshaft oil seal
- Loosen the hydraulic pump tensioner clamp nut
- Loosen the hydraulic pump pivot bolt
- Loosen and remove the hydraulic pump belt tensioner
- [WR] Remove the hydraulic pump pivot bolt
- [MB] Detach the hydraulic pump mounting bracket - on the MB, the pivot bolt fouls the auxiliary radiator. The lower bolt is difficult - a waisted 13mm socket, e.g., Carolus, Teng, is useful
- Detach the drive belt
- Tie the pump out of the way - cord or tie wraps
- Remove radiator upper shroud
Back to index
Next page
Kerbside Motors Home Page and Contact Information