Hydraulic Pump Rebuild

[Kneale Brownson]

At 02:33 PM 06/09/2003 -0700, Derek Pulvino wrote:
>True that on what I received as well; aka no new caps.
>
>So, got the caps off (care of cold chisel and hammer ala Bernie Benz), and
>the pump split open, now can anybody provide some info on how to get the
>drive-shaft portion out of the body?  You know, the part that attaches to
>the pulley.  Kit included a new shaft seal for that portion, and I'd like
>to replace that as well.
>
>Also figured out that new o-rings for the external pentosin unions are not
>included with the kit.  Looks like time for 1-800 University Audi.

You pry the trangular flange off the shaft and use a soft mallet (or a BFH
and block of wood) to drive it out of the pump half after taking the halves
apart.  You need to fish out the old seal from the pump body.

Don't you have a Bentley?  Its on pages  48.27 thru 48.36.  Best write-up
of pump rebuild I've seen.