Timing belt preperation

[ben swann]

What are the differences between doing the T.B. job on a 20V turbo vs a
10 V?  An Audi mechanic freind of mine said the 200 20v tq was more
difficult than the 5000 tq, but I don't see why.

Any different tools that would be required - I fabricated my own Crank
Pully lock tool among others for the 5ktq, is this the same.

Ben

Date: Thu, 13 Mar 2003 23:04:57 -0500
From: DAK <dak at rochester.rr.com>
To: Derek Pulvino <dbpulvino at hotmail.com>
Cc: 200q20v at audifans.com
Subject: Re: Timing belt preperation

The way I did it (on both my '87 5KTQ and '91 200q20v) was to put a 3
foot pipe on my breaker bar. I did have to remove the rubber grip from
the breaker bar to fit the pipe over it. Anyway, the bar was a foot or
so above the engine and I could grasp it easily and puuuuuulllll! :-)

David