Sway Bar Bushings on '90 20tq

[Claus Vegener]

Ben wrote: "
You can tune the Motronic system to be way more efficient - or way less too"

Please how ? Fouling some sensors or what ?
You can change chips for higher boost and the fuel chip have to be changed 
at the same time, but I have never
heard about possibilities to change the fuel economy.

A resistor soldered in series with the lambda could give a lower (fat'er) 
reading forcing the ECU to lean out ?

? Claus

----- Original Message ----- 
From: "Ben Swann" <benswann at verizon.net>
To: "'Brian K. Ullrich'" <bullrich at ullrichsys.com>; "'Schaible, David'" 
<David.Schaible at jrspharma.com>
Cc: "'200q20V mailing list'" <200q20v at audifans.com>
Sent: Wednesday, November 18, 2009 7:50 PM
Subject: RE: Sway Bar Bushings on '90 20tq


> In theory,  the Motronic system in the '91 2Ctq should be better on fuel.
>
> In practice, there are too many other variables, including the car 
> itself - the earlier
> car is more aerodynamic, etc. and for some reason, the CIS system tends to 
> lend itself
> to better economy.  This of course changes when things are modified.  My 
> experience has
> been that the 10V T44's get better fuel economy than the '91 when all is 
> in good sort
> and tune.  I have had probably a good 10 of each.
>
> You can tune the Motronic system to be way more efficient - or way less 
> too.
>
> Anyway, CIS is older and dated, but works fine in this car.
>
> Ben
>
>  _____
>
> From: Brian K. Ullrich [mailto:bullrich at ullrichsys.com]
> Sent: Wednesday, November 18, 2009 1:37 PM
> To: 'Schaible, David'; 'Ben Swann'
> Cc: '200q20V mailing list'
> Subject: RE: Sway Bar Bushings on '90 20tq
>
>
>
> It's a CIS III. And to be honest, I haven't driven it enough to get a real 
> feel for the
> mileage yet.
>
>
>
>  _____
>
> From: Schaible, David [mailto:David.Schaible at jrspharma.com]
> Sent: Wednesday, November 18, 2009 8:37 AM
> To: Ben Swann; bullrich at ullrichsys.com
> Cc: '200q20V mailing list'
> Subject: RE: Sway Bar Bushings on '90 20tq
>
>
>
> Is this car EFI or CIS..I would think EFI if you are getting good fuel 
> #......what mpg
> have you gotten?
>
>
>
> David Schaible
>
> JRS Pharma LP
>
> 2981 Rt. 22
>
> Patterson, NY 12563
>
> 845.878.8343
>
>
>
>
>
>
>
>  _____
>
> From: Ben Swann [mailto:benswann at verizon.net]
> Sent: Tuesday, November 17, 2009 3:34 PM
> To: Schaible, David; bullrich at ullrichsys.com
> Cc: '200q20V mailing list'
> Subject: RE: Sway Bar Bushings on '90 20tq
>
>
>
> Why not?  If everything else is in good condition, expecially cosmetics, 
> then worth it.
> You can get plenty of decent power installing a chip and good driveability 
> out of them
> and the interior is pretty much the same.  Also, not to start a thread on 
> this, but they
> generally get better fuel economy too.
>
> If the car needs paint, interior and/or engine work, then might be better 
> to start with
> a better overall car.
>
> Ben
>
> [Date: Tue, 17 Nov 2009 09:34:00 -0500
> From: "Schaible, David" <David.Schaible at jrspharma.com>
> Subject: RE: Sway Bar Bushings on '90 20tq
> To: '200q20V mailing list' <200q20v at audifans.com>
> Message-ID:
>        <E56C7D8AA050A149989647FBB045017405B49525CC at jrsph9.JRSPHARMA.PVT>
> Content-Type: text/plain; charset="us-ascii"
>
> I don't understand why you would do all this work to a 10v.]
>
>
> ______________________________________________________________________
> This e-mail has been scanned by a Managed Email Content Service.
>
>
> ____________________________________________________________________
>
> For your protection, this e-mail has been scanned for viruses by a Managed 
> Email Content
> Service.
>
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>