resend distributor removal/intake manifold 2nd try

[Dave Defferding]

?ditto and made a tool for the lock down bolt clamping the distributor in 
place.
----- Original Message ----- 
From: "Ed Kellock" <ekellock at gmail.com>
To: "'Eric Huppert'" <ehuppert at hvc.rr.com>; <200q20v at audifans.com>
Sent: Saturday, October 23, 2010 8:06 PM
Subject: RE: resend distributor removal/intake manifold 2nd try


>I used a hack saw blade with duct tape wrapped around the end to saw at the
> thing without removing anything around it.  Took soem time and wasn't
> pleasant but I wasn't comfortable at that point removing more stuff.
>
> Ed
>
>
>
> -----Original Message-----
> From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] 
> On
> Behalf Of Eric Huppert
> Sent: Thursday, October 21, 2010 6:43 AM
> To: 200q20v at audifans.com
> Subject: resend distributor removal/intake manifold 2nd try
>
>
> Kneale,
>
>
>
> I was able to chisel mine off (CAREFULLY) with a small chisel. It's a 
> little
> difficult to get in there, but have done it this way several times. I 
> don't
> believe (or remember!) ever gluing them back on.
>
>
>
> Eric
>
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1136 / Virus Database: 422/3209 - Release Date: 10/20/10
>
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>