Steering Groan-

[JAYTRES at aol.com]

Hello List.   I recently had the misfortune of the hydraulic hose that goes 
from the pump to the rack, blow at the pump. I took off the hose and got it 
rebuilt and installed it back on. While I was in the proccess I did a reseal 
job on the pump as it had never been done before. I reassembled everything 
following the list and bentley, and now its back together. Only problem that 
seems to be is,  when i turn the wheel at lower rpms it makes a groaning 
noise. This definetely wasn't there before and was wondering if anybody had 
any suggestions.

No leaks.
pump belt is to tightened spec. (3/8" in center)
reservoir is full.
I filled the pump with fluid, before putting on hoses.

TIA,
Jay Desmarais- 1990 200TQ  LI,NY