Timing reference sensor

[james accordino]

Does anyone know when the pin on the flywheel is in
the "window", i.e. in front of the timing reference
sensor?  I was so happy that my $0 home made holding
fixture was working so well that I mistakenly removed
the flywheel without marking its position in relation
to the crank.  If I know where the pin on the flywheel
is, say in the window at TDC or 8* BTDC, then it will
be easy to reinstall.  Subject is an MC-2 as found in
an 89 200q.  

TIA
Jim Accordino