How to replace fuel filter in Audi 100?
Pat Dooley
pdooley at gte.net
Sun Sep 24 01:08:08 EDT 2000
One way to reduce spray is wait till morning to do the repair. The system
will lose residual pressure after sitting all night.
> -----Original Message-----
> From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
> Behalf Of DGraber460 at aol.com
> Sent: Sunday, September 24, 2000 2:42 AM
> To: msuryadarma at wesleyan.edu
> Cc: quattro at audifans.com
> Subject: Re: How to replace fuel filter in Audi 100?
>
>
> Others may know of a method to release the pressure, but for
> mine, I broke
> loose the fittings and covered them with a rag to absorb the fuel.
> The fittings are indeed VERY tight. The filter has a hex design
> stamped into
> the ends to facilitate holding with a wrench. Those ends are
> quite large, and
> thin enough so as not to allow the use of an adjustable
> (Crescent) wrench.
> Proper size wrench, or creativity is called for.
> Just use as much force as is needed to get them loose, using
> cheater pipes,
> etc.
> HTH
>
> Dennis
> _______________________________________________
> Quattro mailing list Quattro at audifans.com
> To remove yourself, change to digest mode, or temporarily stop delivery
> please visit the web interface at
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list