Alternator position adjustment

[Ti Kan]

Eyvind Spangen writes:
> Why does the alternator in my '90 200TQ sit too far to the rear? It
> sits about 3 mm more to the rear than the crank pulley, so the belt is
> not straight, and makes a small whine, and it probably causes
> premature wear on the belt too. This occured when I replaced the
> alternator with a rebuilt Bosch..
> Is there any adjustment possibilities?

You can add shims behind the pulley on the alternator.

-Ti
01 S4 2.7 biturbo quattro
84 5000S 2.1 turbo
80 4000 2.0
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///