200TQ rough running/stalling

[Jukka Majanen]

----- Original Message -----
From: "Eyvind Spangen" <eyvind.spangen at c2i.net>
To: "Jukka Majanen" <jiipm at sci.fi>
Cc: "quattro" <quattro at audifans.com>
Sent: Wednesday, December 12, 2001 12:10 AM
Subject: Re: 200TQ rough running/stalling


> On Tue, 11 Dec 2001 23:56:02 +0200, you wrote:
>
>
> >You said except the sensors. Well, still I would like to
> >name one = Your Hall-sensor?
>
> I pulled the codes today. No codes to pull - 4444..
> It will start with some "help", and the tachometer doesn't work at
> all, except when I floor the pedal, it jumps up and down like crazy.

OK, by the codes, everything is ok, but in my opinion
some sensors can be partly functional ( not damaged )
and so the diagnosis system sees nothing. Also it can
be the Hall-rotor failure or that TDC-sensor in the
bellhousing. Your tacho just made me thinking...

Somewhere people are said the Hall cannot be replaced/
bought to that MC distributor. They can. Just last week
one of our ( Fi ) listers bought a one from a workshop,
that is spec. at Bosch systems.

best
j-pm

with
Audi 80 GTE for daily...
V8 body for the next project :)