MC-2 Guts

[JShadzi at aol.com]

The pins are in the exact same place, and the same 10v head studs can be used
with a 10v, and 20v studs with the 20v head.  IME the stock headgaskets have
been more than reliable too, well into the 20psi 300hp range.

Javad

<< Never seeing a 20V block I would guess from my experience with the eurovan
 block the headgasket would work, aligning pins might be in a different place
 and I am not sure if the head bolt size is the same as a 10V or not. But
 still the 10V head gasket holds up well to 20 PSI and I have heard of people
 running as high as 23 PSI using an OEM headgasket. Is there a cost savings?
 Whetever you use make sure it's original equipment and made in Germany as
 Diesels like to eat oem stuff made in Spain or Brazil.
  >>